Espace de noms de la page (page_namespace) | 0 |
Titre de la page (sans l’espace de noms) (page_title) | 'How Bulkhead Fitting Services Are Delivered' |
Titre complet de la page (page_prefixedtitle) | 'How Bulkhead Fitting Services Are Delivered' |
Ancien modèle de contenu (old_content_model) | '' |
Nouveau modèle de contenu (new_content_model) | 'wikitext' |
Texte wiki de l’ancienne page, avant la modification (old_wikitext) | '' |
Texte wiki de la nouvelle page, après la modification (new_wikitext) | '<br>Bulkhead fitting is specially designed fitting meant for free flow of fluids in tanks, pipes, drain field and many other plumbing interfaces. These fixtures are very useful in various situations where water supply is required in large quantities. Bulkhead fitting also known as butt weld pipe fittings, are mainly used for construction purposes and to connect flexible pipe with the help of male fittings. These fittings offer full flow of liquid and they can also be used to connect other flexible tubes.<br><br><br>To perform the bulkhead fitting, there are few things that have to be fixed before the fitting can take place. First of all, a hole has to be dug in the part of the tank where desired bulkhead will be fitted. It is through this hole that the hose pipe will pass through. After the hole is ready, an appropriate sized pipe will have to be inserted into the hole and then threaded to suit the pipe fittings. The hose pipe will be attached to the hole with help of several pipe fittings including rubber O-rings. There should be enough of these to make sure that the whole tank is filled with liquid.<br><br><br>Once this is done, a small rubber O-ring seal is to be applied around the fitting hole and the tank area. If you loved this information and you wish to receive more info concerning [https://www.shunchengvalve.com/ball-valve-manufacturers/ click this link now] please visit the web page. This gasket will help in ensuring that the liquid is correctly confined within the tank. Now another bulkhead fitting hole is to be dug at the same spot where the previous hole was located. Here the hose pipe needs to be threaded again and inserted again into the hole. This time round, the gasket is to be applied around the tank area.<br><br><br>Now another bulkhead fitting hole is to be dug and a pair of gaskets is to be inserted here. The gasket is to be applied onto the gasket and the nuts are to be placed onto the gasket. These nuts are to be screwed on the gasket ensuring that it remains in place. The nuts are to be secured using a few nails.<br><br><br>The last step involves the fixing of the hose pipe and the gasket. The hose pipe is placed onto the fitting hole and the locking nut provided for the gasket is to be turned. This locking nut is usually made of brass or some other metal suitable for the task. Then the hose is fixed onto the gasket and the process is completed.<br><br><br>In case of unusual fittings, the application of sealant is the first step. As in the case of unusual tanks, the bulkhead fitting should have a seal. A special type of valve is used here where a vacuum seal is created. This valve is responsible for creating a vacuum which draws all the gases up into the valve. After the vacuum is formed, the pipes are reinstalled and the sealing tape is replaced.<br>' |
